| Part No. | Description |
|---|---|
| 10080892 | Exhaust Manifold |
| 10080909 | Pipe Unit |
| 10080910 | Free end spacer |
| 10080922 | Center Spacer |
| 10080934 | End Cap |
| 10241991 | Coupling Clamp |
| 10171393 | Gasket at section |
| 10120804 | Elbow, CYL. No. 1 RS |
| 10120798 | Elbow, CYL. No. 1 LS |
| 10242752 | Bellows connector at no. 1 RS and LS elbow |
| 10244130 | Coupling Clamp bellows to elbow |
| 10240445 | Gasket, coupling clamp  |
| 10170534 | Gasket, Bellows flange to Turbo connector |
| 10240329 | Cap screw, Spl. Bellows to turbo connector |
| 10240317 | Washer, Spl. |
| 15330412 | Lock wire, 0.0625” x 60” Stn. Stl. |
| 10080247 | Double nut Spl. |
| 10170479 | Gasket, manifold to Cyl. head  |
| 10120695 | Strong back, air & exhaust elbow to Cyl. Hd. |
| 15011264 | Cap screw, strong back to Cyl. Hd. 7/8”-9x4 1/4” long |
| 15393203 | Lock washer, 7/8” |
| 10220264 | Cap screw, Spl. Manifold to Cyl. Hd. |
| 15393161 | Lock washer 5/8” |
| 15390160 | Plain washer 5/8” |
| 10080120 | Nut, special |
| 10080168 | Exhaust manifold brace Assy. |
| 10120567 | Stop cup at end cap |
| 10160164 | Brace spring |
| 10190648 | Locating Foot |
| 10080326 | Clamp Plate |
| 15076313 | Cap screw, spring to foot 7/8”-14x5- 1/2” long |
| 15355202 | Nut-7/8”- 14 |
| 15393203 | Lock washer, 7/8” |
| 15330217 | Spirol pin, locating foot to spring 1/2”x1-1/4” long |
| 10211251 | Stop rod, spring to stop cup |
| 15357200 | Jam nut, stop rod to spring, 7/8”-14 |
| 15323180 | Cotter pin stop cup to stop rod 3/16” x 2-1/4” Stn. Stl. |
| 10080132 | Heat shield Assy. |
| 10180679 | Heat shield Gen. end |
| 10180780 | Heat shield Free end |
| 15031081 | Cap Screw, Heat Shield to Br. Pipe 3/8”-16x7/8” long |
| 15393124 | Lock washer 3/8” |
| 15380123 | Washer 3/8” |
| 15031081 | Bolt 3/8”-16x7/16” long |
| 15393124 | Lock washer 3/8” |
| 15410080 | Washer 3/8” |
| 15350125 | Nut, 3/8”-16 |
After Cooler
| Part No. | Description |
|---|---|
| 10080764 | After Cooler with bottom cover |
| 10081355 | After Cooler |
| 10120324 | Cover bottom |
| 10170418 | Gasket, bottom cover to after cooler |
| 15032139 | Cap screw, Hex. Hd. Bottom cover to A/C 1/2”-13x1- 1/2” long |
| 15393148 | Lock washer, 1/2” |
| 10120312 | Cover, Top |
| 10170406 | Gasket, cover to after cooler |
| 10120300 | Plate, after cooler centering in turbo support |
| 10170388 | Gasket, centering plate to support |
| 10170390 | Gasket after cooler to turbo support |
| 15032115 | Cap screw, Hex. Hd. Centering plate to support 1/2”-13x1- 1/4” long |
| 15393148 | Lock washer 1/2” |
| 10170820 | “O” Ring, bottom cover |
| 15031202 | Cap screw, Hex Hd. Top cover to A/c 3/8”-16x2- 3/4” long |
| 15393124 | Lock washer, 3/8” |
| 15032176 | Cap screw, Hex Hd. Top cover to A/C 1/2”-13x2” long |
| 15393148 | Lock washer, 1/2” |
| 15032255 | Cap screw, hex Hd. Top cover to A/C 1/2”-13x4” long |
| 15393148 | Lock washer, 1/2” |
| 15032322 | Cap screw, Hex Hd. Top cover to A/c 1/2”-13x5- 3/4” long |
| 15393148 | Lock washer, 1/2” |
Turbo Super Charger
| Part No. | Description |
|---|---|
| 10080193 | Turbo Super Charger |
| 10120464 | Blower inlet casing |
| 10170443 | Gasket, blower inlet |
| 10130263 | Diffuser, ring |
| 10240081 | Diffuser shim |
| 15154089 | Machine screw, diffuser to blower inlet 5/16”-18x7/8” long |
| 15061115 | Cap screw blower inlet to blower casing 1/2”-13x1- 1/4” long |
| 15396149 | Lock washer, 1/2” long |
| 10120440 | Blower Casing |
| 15121161 | Stud to intermediate Casing 1/2”-13x1- 7/8” long |
| 15366145 | Nut 1/2”-13 |
| 15396149 | Lock washer, 1/2” |
| 11304248 | Pipe plug 1/4” IPS CSK |
| 10212504 | Pipe Plug 3/8” IPS Sq. Hd. |
| 10120506 | Intermediate Casing |
| 11291760 | Pipe Plug 1-1/2” IPS Soc. Hd. |
| 11304224 | Pip Plug 1/8” IPS Hex |
| 11291746 | Pipe Plug 1-1/4” IPS CSK |
| 11291102 | Pipe plug 3/4” IPS Sq. Hd. |
| 10210430 | Washer oil pipe |
| 10170730 | “O” Ring, pipe sealing |
| 10230294 | Oil Pipe |
| 10120713 | Clamp, L.O. Inlet to casing |
| 15084176 | Cap screw Soc. Hd. Clamp to CSG 3/8”-16x2” lomg |
| 15396125 | Lock washer, 3/8” |
| 10210908 | Pin, Spl. Brg. Locating Dowel |
| 10080211 | Rotor |
| 15085200 | Cap screw, Soc. Hd. Intermediate Casin turbine CSG. 1/2”-13x- ” long |
| 15397142 | Lock washer 1/2” |
| 10130111 | Oil Seal, turbine end |
| 10130135 | Oil Seal, blower end |
| 15151050 | Machine screw, Fl. Hd. Blower oil seal t CSG. No. 10-24x1/2” long |
| 10150067 | Bearing, turbine end |
| 10150079 | Bearing, blower end |
| 15345105 | Retaining ring, turbine end oil seal |
| 10170431 | Gasket, intermediate to turbine Casing |
| 10120488 | Turbine casing |
| 11291205 | Pipe plug, 2-1/2” IPS Sq. Hd. |
| 10120816 | Inlet casing |
| 10123096 | Nozzle ring |
| 10240378 | Heat shield |
| 10220252 | Bolt Spl. Nozzle ring to casing |
| 10220367 | Nut Spl. Nozzle ring bolt |
| 10240883 | Washer heat shield to nozzle ring |
| 15330412 | Lock wire 0.0625” x 12” Stn. Stl. |
| 15270087 | Machine screw, Fl. Hd. Inlet casing locating, 3/8”-16x3/4” long |
| 10120828 | Gasket, inlet CSG to manifold |
| 10270480 | Gasket, connector to inlet casing |
| 10212688 | Cap screw, clamp ring inlet to turbine casing |
| 15395169 | Lock washer, 5/8” |
| 10080223 | Tube Assy. (L.O. Inlet to turbo) |
| 10230130 | Tube 1/2” OD x 0.049” wall x 21-1/4” long |
| 11320126 | Connector male 1/2” OD x 3/8” IPS |
| 11283166 | Reducer 1/2” IPS x 3/8” IPS |
| 10180072 | Clamp L.O. pipe |
| 15060081 | Cap screw, clamp to turbo, 3/8”-16x7/8” long |
| 15350125 | Nut, 3/8”-16 |
| 15393124 | Lock washer 3/8” |
| 10190429 | Turbo to support bracket |
| 15090152 | Cap screw, bracket to turbo 5/8”-11x1- 1/2” long |
| 15393161 | Lock washer, 5/8” |
| 15090152 | Cap screw, bracket and turbo to spacer 5/8”-11x1- 3/4” long |
| 15350162 | Nut, 5/8”-11 |
| 15393161 | Lock washer, 5/8” |
| 10120592 | Spacer, turbo to support |
| 10240093 | Shim, spacer to support |
| 15010200 | Cap screw, spacer to support, 3/4”-10x2- 3/4” long |
| 15350186 | Nut, 3/4”-10 |
| 15393185 | Lock washer 3/4” |
| 10020196 | Turbo support |
| 11290742 | Pipe plug 1/4” IPS Sq. Hd. |
| 10220653 | Pipe plug 1/2” IPS Sq. Hd. |
| 10080764 | After cooler and bottom Cover Assy. |
| 10170406 | Gasket, cover |
| 15032139 | Cap screw, cover to support, 1/2”-13x1- 1/2” long |
| 15393148 | Lock washer, 1/2” |
| 10170352 | Gasket, support to Cyl. Block, lower |
| 10171368 | Gasket, support to Cyl. Block, upper |
| 10170376 | Gasket, support to base |
| 15090152 | Cap screw, support to block and base, 5/8”-11x1- 3/4” long |
| 15090190 | Cap screw support to block, 5/8”-11x2- 1/2” long |
| 15396149 | Lock washer, 5/8” |
| 15296131 | Taper dowel, support to block No. 11 x 1-1/2” long |
| Expansion Joint, Turbo Air Discharge To Support | |
| 10080272 | Expansion joint gland |
| 10191320 | Packing ring |
| 10190430 | Packing flange |
| 10170571 | Gasket, expansion joint |
| 10170250 | Gasket, expansion joint to turbo |
| 10170261 | Gasket, expansion joint to turbo support |
| 15032115 | Cap screw, expansion joint to turbo support 1/2”-13x1- 1/4” long |
| 15393148 | Lock washer, 1/2” |
| 15032176 | Cap screw, expansion joint to turbo |
| 15393148 | Lock washer, 1/2” |
P.G.E.V. Governor (Woodward)
| Part No. | Description |
|---|---|
| 10341031 | Screw, Hex, Hd. Drilled 5/16”-24x7- 1/4” long |
| 10341079 | Plain washer 5/16”-24x1/32” |
| 10340889 | Oil Filter Cup (Press fit) |
| 10340865 | Cover dowel bushing (Press fit) |
| 10340919 | Cover |
| 10340907 | Cover Gasket |
| 10343222 | Screw, Soc. Hd. 1/4”-28x2- 3/8” long |
| 10361534 | Lock Washer, split, 1/4” |
| 10343088 | Washer |
| 10340191 | Power Case Assy. |
| 10360517 | Electrical receiver Assy. |
| 10363002 | 'D' solenoid Cup |
| 10343866 | Screw, hex. Hd. 250”-28 x .750” long |
| 10343325 | Regulating bushing retainer spring |
| 10342928 | Retaining Spring collar |
| 10343064 | Washer .328”x.562”x.064” thick |
| 10343428 | Screw, Retaining |